UNPRECEDENTED MODULARITY
- slide-in/ interlocking mechanism
- PIN-to-PIN contact point for receiving power and signal
- reduced need for mounting screws
DESIGNATED CABLE MODULES FOR UNI FAN SL120
Each UNI FAN features a cable module with a PIN-to-PIN contact point to receive power and signal.
Each cable module can support up to 4 UNI FAN SL120s, allowing users to choose to use either a single fan or up to 4 fans in one go.
Note! When using the UNI FAN SL120 in a custom watercooling configuration, make sure that the fittings on the radiators do not interfere with the contact point on the side of the fans. We suggest to use the insulating tape to isolate contact points.
SOPHISTICATED RGB LIGHTING
The 32 addressable RGB LEDs embedded in each fan (16 LEDs on either side of the frame) ensure vibrant lighting effects.
VIBRANT RGB LIGHTING VISIBLE FROM ALL ANGLES
The 16 LEDs on each side shine through a diffuser, ensuring a smooth light is visible from all angles.
L-CONNECT SOFTWARE FOR A MORE INTUITIVE FAN CONTROL
With the toggle of a switch, changing control between motherboard software and the L-Connect is a breeze.
NOTE! The 4 possible clusters of UNI FANs that can be connected to the controller are reflected on the L-Connect interface. VIA L-Connect, users can adjust a single UNI FAN SL120, a single cluster of up to 4 fans, or all 4 clusters of fans according to their needs.
A DESIGNATED UNI FAN CONTROLLER TO EASILY MANAGE 16 FANS IN ONE GO
If the motherboard used in your build doesn’t have the requisite 3-PIN 5V ARGB headers, you can leave this port unplugged, but then you won’t be able to switch to motherboard synchronisation with the toggle shown on the L-Connect.
For user who do not want to use the controller box, the UNI FAN SL120’s RGB connector can also be connected directly to the motherboard 5V header. For motherboard that supports 5v ARGB LEDs, it should come with an adaptor cable. The ARGB connector from the SL120 can connect to this adaptor cable then directly to the motherboard 5v 3 pin header.
To fully control up to 16 UNI FAN SL120s (4 fans each cluster) in one go either through the built-in L-Connect software or the motherboard software, users must use the designated UNI FAN controller included in the 3 pack packages. Please note that the single pack version does not contain this controller and thus we recommend users to purchase at least one 3 pack for their build.
