Boost your gaming aesthetic with the CiT Raider Black ARGB PC Case. Featuring six ARGB Inner-Ring Infinity fans as well as providing ample support for all your high-end hardware.
Take your setup to new levels with a stylish and elegant dual 4mm tempered glass panelling with a 70% front tint and 30% side tint this case looks a prospect. Surrounded from every angle with stylish and sleek fans, customisable RGB lighting and effortless cable management. Within the interior of the Raider includes cable routing holes on the Motherboard backplate that makes managing your cables nice and easy and keeps your PC looking clean.
Install another two fans to fully populate the Raider and make it eight fans and with up to three water cooling locations, this case is full of cooling capability.
Stand out with the touch of Infinity, the circular-shaped infinity mirrors at the centre of the fans create a mesmerising LED lighting display with their multi-layer effect. They not only look fantastic but also ensure all components are taken care of for when it comes to keeping temperatures balanced & conditions optimised for a peak performance.
Moving onto the top of the case the I/O panel provides varied connectivity support with USB3.0 and USB2.0 connections and inside the Raider we have included a 6-port magnetic ARGB fan hub with controls for your LED lighting and have access to approximately 25 LED modes or have access to 16.8 million colours using a compatible addressable RGB Motherboard.
This completely black interior has smart build potential with a spacious interior offering wide support for a range of gaming hardware to build a powerful effective gaming PC. It can fit a graphics card up to 35 centimetres in length, CPU Cooler up to 16 centimetres in height and can hold 2 x 2,5" and 2 x 3,5" drives. An ATX power supply unit measuring up to 200mm will fit inside.
Build a striking gaming chassis with ease and create gaming PC with real purpose and intent using the Raider.
Main Features
- Classy Raider - The CiT Raider is built using a combination of premium materials, the chassis is 0.5mm SPCC steel and the front and left-hand side panelling is made with stylish 4mm tempered glass and a 70% / 30% tint to showcase your ARGB fans and key components. The tempered glass is surrounded by black interior for that classic look.
- High-End Cooling - There are six pre-installed Inner-Ring Infinity fans on the CiT Raider. There are three 120mm fans mounted onto the front panel, whilst there are two 120mm fans are mounted on the top and a single fan on the rear panel. These fans can be controlled one of two ways either via the integrated LED button on the I/O panel or by connecting the 5V 3pin connector from the hub to your Motherboard.
- Six Infinity 120mm ARGB Inner-Ring Black Fans - This version of the CiT Raider comes with 6 x Infinity 120mm ARGB Inner-Ring Black Fans. The Inner-Ring and the circular-shaped, multi-layer Infinity Mirror Design, the Infinity fans add a mesmerising LED lighting display to the Raider.
- Tempered Glass Panel - The solid 4mm tempered glass panels with 70% tinted glass on the front and a 30% tinted glass on the side adds a premium finish and reduces glare and offers an obstructed view of the interior, components and ARGB.
- Motherboard Software - The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.
- VDG Connector Included - A 3pin VDG connector is included which is intended for use with older Gigabyte and Aorus Motherboards.
- Fan Controller Included - A 6-port magnetic hub is included inside the Raider, designed with a magnet it can easily fit inside your case. Add up to 6 case fans and is powered directly from your power supply via SATA. You can access it using the LED button and can be connected to your Motherboard using a single cable - you can setup without any additional cables.
- Available In Two Colours - The CiT Raider is available in two colours, black or white. The model of the Raider is the black, the perfect backdrop for high-end hardware and RGB lighting.
- PSU Shroud - To keep the interior looking neat and tidy the Raider has a dedicated PSU Shroud that is made with solid steel panelling that perfectly covers the cables, showcases the PSU specs and contains a hard drive mount. The PSU shroud can mount two 3.5" hard drives. There are another two hard drive slots available at the back of the Motherboard plate so in total there is 2 x 2.5" and 2 x 3.5" that can be mounted to this chassis.
- ATX Housing - Standing at 450mm high, 192mm wide and 405mm deep the Raider is compatible with a wide range of components, with 350mm of clearance for GPUs and it can facilitate CPU coolers up to 160mm tall. There are seven expansion slots on the rear panel for PCIe devices.
- I/O Panel - Providing you with a varied connectivity support, the Raider has a fully equipped I/O panel featuring one USB 3.0, two USB 2.0 and HD Audio, as well as a LED Button (Reset Switch).
