B Grade Item
Please note that this is a B Grade clearance item. It will be in good condition, but may show light signs of use and/or have been repackaged. The price has been reduced to reflect this.
All B Grade items are complete, working and have been fully tested.
This item is supplied with a 1 Year Year warranty.
Enhance your gaming decor with the CiT Blade ARGB PC Case. Featuring six ARGB Inner-Ring fans as well as providing ample support for all your high-end hardware.
Take your setup to new levels with this distinctive and customisable ATX gaming chassis with a stylish and elegant dual tempered glass panelling with a 70% tint joined by dedicated front ventilation channels combine to offer a stunning look and substantial airflow this case has the functionality and aesthetics to match.
Surrounded from every angle with smart ARGB fans, customisable RGB lighting and effortless cable management. Within the interior of the Blade includes cable routing holes on the Motherboard backplate that makes managing your cables nice and easy and keeps your PC looking clean.
Install another two fans to fully populate the Blade and make it eight fans, fan mounts on the PSU shroud for improved VGA cooling and with up to two water cooling locations, this case is full of cooling capability.
Moving onto the top of the case the I/O panel provides varied connectivity support with USB3.0 and USB2.0 connections and inside the Blade we have included a 6-port magnetic ARGB fan hub with controls for precise control of your LED lighting and have access to approximately 25 LED modes or have access to 16.8 million colours using a compatible addressable RGB Motherboard.
This completely black interior has smart build potential with a spacious interior offering wide support for a range of gaming hardware to build a powerful effective gaming PC. It can fit a graphics card up to 29 centimetres in length, CPU Cooler up to 15.5 centimetres in height and can hold 2 x 2,5" and 2 x 3,5" drives (Please note only 1 x 2.5" or 1 x 3.5" hard drive can be mounted in the stated locations). An ATX power supply unit measuring up to 150mm will fit inside.
Build a signature gaming case with ease and create a sharp gaming PC with real style using the Blade.
Main Features
- Elegant Blade - The CiT Blade is built using two tempered glass panels perfect for showing off your system and lighting, with dedicated front ventilation channels for ample airflow and tempered glass panelling with a stylish 70% tint to showcase your ARGB fans and key components. The tempered glass is surrounded by black interior for that classic look.
- High-End Cooling - There are six pre-installed Inner-Ring ARGB fans on the CiT Blade. There are three 120mm fans mounted onto the front panel, whilst there are two 120mm fans are mounted on the top and a single fan on the rear panel. These fans can be controlled one of two ways either via the integrated LED button on the I/O panel or by connecting the 5V 3pin connector from the hub to your Motherboard.
- Fan Controller Included - A 6-port magnetic hub is included inside the Blade, designed with a magnet it can easily fit inside your case. Add up to 6 case fans and is powered directly from your power supply via SATA. You can access it using the LED button and can be connected to your Motherboard using a single cable - you can setup without any additional cables.
- Motherboard Software - The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.
- VDG Connector Included - A 3pin VDG connector is included which is intended for use with older Gigabyte and Aorus motherboards.
- Tinted Tempered Glass Panels - The solid tempered glass panels with 70% tinted glass adds a premium finish and reduces glare and offers an obstructed view of the interior, components and ARGB.
- Available In Two Colours - The CiT Blade is available in two colours, black or white. The model of the Blade is the black, the perfect backdrop for high-end hardware and RGB lighting.
- PSU Shroud - To keep the interior looking neat and tidy the Blade has a dedicated vented PSU Shroud that is made with solid steel panelling that perfectly covers the cables, showcases the PSU specs and contains a hard drive mount. The PSU shroud can mount a 2.5" or 3.5" hard drive. There is another hard drive slot available on top of the PSU shroud so in total there is 2 x 2.5" and 2 x 3.5" that can be mounted to this chassis (Please note only 1 x 2.5" or 1 x 3.5" hard drive can be mounted in the stated locations).
- Vented Side Panel - The right-hand side panel made of metal is vented, natural airflow increases thanks to the additional ventilation through the circular cut-outs.
- ATX Housing - Standing at 447mm high, 194mm wide and 338mm deep the Blade is compatible with a wide range of components, with 290mm of clearance for GPUs and it can facilitate CPU coolers up to 155mm tall. There are seven expansion slots on the rear panel for PCIe devices.
- I/O Panel - Providing you with a varied connectivity support, the Blade has a fully equipped I/O panel featuring one USB 3.0, two USB 2.0 and HD Audio, as well as a LED Button (Reset Switch).
